[phi___@localhost bin]$ ./dispcal -yc -v -t5500 -g2.2 -e3 -qh Mitsubishi5500KG2.2_14082008
XRandR 1.2 is faulty - falling back to older extensions
Setting up the instrument
Instrument Type:   Spyder 2
Serial Number:     00759662
Hardwar version:   0x0307
Place instrument on test window.
Hit Esc, ^C or Q to give up, any other key to continue:
Display type is CRT
Target white = 5500.000000 degrees kelvin Daylight spectrum
Target white brightness = native brightness
Target black brightness = native brightness
Target advertised gamma = 2.200000

Display adjustment menu:
Press 1 .. 7
1) Black level (CRT: Offset/Brightness)
2) White point (Color temperature, R,G,B, Gain/Contrast)
3) White level (CRT: Gain/Contrast, LCD: Brightness/Backlight)
4) Black point (R,G,B, Offset/Brightness)
5) Check all
6) Measure and set ambient for viewing condition adjustment
7) Continue on to calibration
8) Exit
Doing check measurements
Black = XYZ   0.04   0.03   0.03
Grey  = XYZ   8.73   9.22   9.34
White = XYZ  45.09  46.05  50.24
1%    = XYZ   0.32   0.37   0.26

  Current Brightness = 46.05
  Target 50% Level  = 10.02, Current =  9.22, error = -1.8%
  Target Near Black =  0.46, Current =  0.37, error = -0.2%
  Target white = x 0.3325, y 0.3475, Current = x 0.3189, y 0.3257, error = 10.04 DE
  Target black = x 0.3325, y 0.3475, Current = x 0.3354, y 0.3884, error = 17.80 DE